Are you frustrated and would like to know how to get glue off a snowboard?
Stickers on a snowboard are a great way to show off my board. Having a stomp pad is also important in helping me be in control of my snowboard whenever I get off the chair.
But what do these two have in common?
They often left glue residue whenever I peel them off. The sticky feeling isn’t pleasant at all. If you have been looking for answers, I got your back.
In this article, I will provide a guide on how to get glue off a snowboard, how to get the right snowboard size, and tips for maintaining your snowboard in good condition on and off-season.
How you can get glue off a snowboard and other snowboard tips:
- 8 Ways On How To Get Glue Off A Snowboard
- How To Get The Right Snowboard Size
- Tips On Keeping Your Snowboard In Good Condition
Affiliate Link Disclosure
Some of the links on here are affiliate links, and I may earn if you click on them, AT NO EXTRA cost to you. I hope you find the information here useful! Thanks.
- 17 Best Women’s Snowboarding Pants [2022 Guide]
- 11 Best Women’s Snowboarding Boots [2022 Guide]
- Can You Wear Snowboard Boots For Walking? Read This First!
8 Ways On How To Get Glue Off A Snowboard
Stickers and stomp pads are the two things that I love to have on my snowboard but when it comes to removing them, they often leave nasty glue residue.
Lucky for you, with all my experiences having to remove the adhesive off my snowboard, I have compiled a list of ways that help you get the glue off a snowboard easily.
1. Keep Your Snowboard Clean
It is essential to clean the surface of your snowboard before you start removing adhesive from the snowboard. Any presence of dust, dirt, or oil will make removing glue from your snowboard challenging.
Go ahead and use a clean rag and give your snowboard a good cleaning first before everything else.
2. Wet The Snowboard Surface
A good gentle wipe using a sponge or wet cloth will help clean the surface of your snowboard. Once it is wet, try the gentle rubbing method while removing the stickers altogether.
Have extra caution on not to break the sticker as it will make the removal process harder.
3. Use A Hair Dryer
As you may be aware, some glue melt under warmer temperature. If you have an old hair dryer sitting at home, put it in a warm setting and start blowing it on the sticker. It will be easier to remove the stickers once the snowboard surface has been heated up.
As a snowboard is made up of metal and will heat up easily, be careful not to immediately touch your bare fingers on the surface where the hair dryer has been directed at.
4. Lighter Fluid
Another way to get the glue off a snowboard is by using lighter fluid. Apply a few drops of lighter fluid onto the stickers around the edge. The lighter fluid will penetrate and sticker and comes in contact with the glue below.
Allow the fluid to sit and evaporate and use latex gloves over your finger when removing the sticker.
WD40 seems to be another option when it comes to removing the glue. All you need to do is to spray the WD40 lubricant on the area of glue you wish to remove. If it is a sticker, allow the liquid to soak through and be left for several minutes.
The sticker will not be removed effectively if you tried it immediately after application. Once the liquid has been fully absorbed, take a damp cloth or any scraper to remove the glue residue or sticker.
6. Vegetable Oil
This is a hack worth trying. Any kitchen cooking oil such as canola, olive, and sunflower oil is known to be able to dissolve adhesive. All you need to do is dab your paper towel into one of these cooking oil and lay it over the glue residue.
Wait for a few minutes and remove the paper towel. Gently rub the glue residue with a clean paper towel.
7. Citrus-based Cleaner
GooGone, a type of citrus-based cleaner is known to be absolutely safe on snowboards due to its non-abrasive properties. GooGone is also known to remove adhesive. Just let the base cleaner sit for a minute and gently scrap the glue off.
This is my least favorite method because if you are not careful with it, you might end up doing more damage to your snowboard. If your sticker is dried, you can opt for a painter razer blade, wax scraper, or plastic scraper but put extra caution when it comes to the scraping.
Things To Avoid With Glue On The Snowboard
Now that you’ve learned how to get glue off a snowboard, it is equally important to know what not to do when it comes to removing adhesive on your snowboard.
Refrain from using acetone. Since acetone is prone to damaging plastic surfaces, the last thing you want is for it to ruin your snowboard. Acetone is great if you have been wondering how to get glue off of wood.
Avoid scraping with your nails. This can hurt or injure your fingers. Instead, choose a plastic scraper to help remove the adhesive.
How To Get The Right Snowboard Size
If you’re just starting out like me, you’re probably wondering how to fit a snowboard. There are plenty of factors to consider on how to size a snowboard and I have compiled a comprehensive guide on what you should look out for when it comes to choosing your snowboard.
1. Snowboard Length
The traditional method is to stand a snowboard on its tail and see where the nose of the board land. The ideal fit will be somewhere between your nose and chin.
However, this method is somewhat flawed because it does not take into count your body weight, your ability level, and the type of riding you plan to do. There are plenty of snowboard size charts out there for your easy reference.
Alternatively, you can also try this recommended formula: Your Height (in inches) X 2.54 x 0.88 = Your Recommended Board Length.
2. Snowboard Width
The width of the snowboard is as important as the length and is often overlooked. The width normally corresponds directly to your boot size.
Your snowboard boots should hang just slightly over the edges of your board but not too much that it will hit the snow or too little that you could not control the board.
This slight extension of your toes and heels over the edges of your board helps you maintain the pressure control you need with your ankles.
If your boots are extending over the board wide, you will experience nasty toe and heel drag. These are the last thing you want as they can either slow you down or cause you to lose control of your board.
3. Type of Snowboard
The type of terrain will influence the type of snowboard you should get. Some of the boards are specifically designed for specific riding styles. Are you the ride it all or would like to focus on just park riding or powder? Let’s find out.
- All-Mountain Snowboard
The all-mountain snowboards are designed to accommodate most terrains and snow conditions. If you would like to try it out in the park before taking it on the mountain, the all-mountain snowboard will accommodate it all.
The all-mountain snowboard is great for beginners who are just getting started and are learning what terrain they like.
- Powder Snowboards
This board usually comes with a wider nose and a narrow tail and it’s designed for deep powder snow.
Powder snowboard riders have to lean into turns with their whole body to create enough momentum to plow through deep snow. Many powder snowboards have rockers to help rider float and pivot easily.
- Freestyle or Park Snowboards
This is a style that calls out to the terrain parks, tree trunks, rails, trash cans, back-alley street cats, and more. The freestyle snowboard tends to run a bit shorter in length and is a bit more flexible.
The shorter length is an advantage for a rider who loves performing tricks and style. The board is also great for beginners as it gives control over its edges and is quicker.
- Freeride Snowboards
This snowboard is for the adventurous rider who rides on ungroomed snow on any terrain. The board is meant to be ridden with one end always facing downhill which is why they are designed to be directional boards.
Freeride snowboards generally have stiffer flex compared to freestyle snowboards.
There are a lot of factors when it comes to how to get the right snowboard size. This is because each snowboarder’s riding style is unique and different from one another.
If you have the confidence, you may want to consider learning how to build a snowboard. Another great option is to have your snowboard customized to your own need.
How to Keep Your Snowboard in Good Condition
New snowboards do not come cheap therefore, it is important to know how to properly clean, maintain, repair, and store your snowboard.
Proper maintenance will help keep your snowboard last for years and in good condition for as long as possible. Here is a list of things you need to know.
1. Clean The Snowboard Base
Don’t let the clean white snow deceive you because your snowboard can still get dirty. Give the base a proper clean after every few runs and this will give you a positive experience while you’re gliding through the ice.
Cleaning the base is as simple as spraying a cleaning solution and wiping it down with a clean cloth. Cleaning the base also helps prepare your snowboard to be waxed which we will discuss next.
2. Wax Before And After Snowboard Sessions
New snowboards come with what is known as “factory wax”. Though it may be good enough to go on a run in the snow, you may want to consider giving your new board a hot wax.
One of the reasons is that “factory wax” is not the same as hot wax. Another reason to consider waxing your new board is that you may not know how long your board has been sitting in a shop or warehouse and it may have dried out.
The performance and longevity of your snowboard depend on how consistently you wax your board. The wax seals the snowboard base and prevents it from drying out which can cause delaminating.
You may find your snowboard slowing down on a flat surface and the base is white and which is a sign that your board is due for a wax.
3. Polish Any Cuts and Rust
You do not have to panic if you find tiny cuts and rust on your snowboard but don’t ignore them either. These may potentially cause cracks over a long period of time.
The good news is you can prevent it by simply smoothing it down using a snowboard edger or just taking your board to a snowboard shop.
4. Repair Any Damages Immediately
It is common for your board to experience tiny bits of damage throughout the season but do not ignore these minor wear and tear. These gauges may penetrate past the layers of your board and eventually may damage the board.
These are a few common types of damage you need to be aware of:
- Presence of cracks on the side of the snowboard
- The laminate peeling off on the top
- Obvious major cracks on the nose or tail of the board as well as the stomp pad
- Warping and deformation of the snowboard shape
- Any exposed layer of the snowboard and holes
Any damage whether minor or major deserves attention and immediate repairs. A majority of the snowboards have wood cores, the last thing you want is to have them exposed to wet conditions which can rot, crack and damage your snowboard.
If you are confident enough and have the supplies, you may opt to repair your own snowboard. However, I will still recommend taking your snowboard to professional repair service as they will more likely identify other unknown damages.
5. Keep Out Of Unknown Risky Terrain
You can prolong your snowboard longevity by not into rocks or hazardous landscapes which can damage your board. This is hard to be avoided and it happens even to the pros.
If it is a tiny scratch, it can easily be buffed with hot wax. However, if the damage is deep, it is important to take your board to get it fixed immediately.
Most importantly, keep a look out to avoid hazardous paths and stay on the snow path to avoid any unwanted accidents.
6. Keep Your Board Dry
How you store your board for the rest of the seasons is very important in maintaining your snowboard which is why it is important to keep your board in dry storage. Make sure you follow these steps before you store away your board.
Step 1. Wipe down your board
Before you put away your snowboard, make sure you give your board a proper wipe-down using a cleaning solution. Gently scrub away those tiny bits of debris or dirt. Check if there is any damage that needed to be repaired.
Step 2. Apply a fresh coat of wax
Since you will be storing away your board for a period of time, make sure to apply a layer of hot wax to the board. Wax can protect your board from humidity and any harmful UV damage.
Step 3. Keep out of humid storage space
Humidity causes long-term moisture and it can damage your board. You can opt for a dehumidifier in the space where your snowboard is stored if you are worried about the humidity.
- Can You Use Hiking Boots For Snowboarding [Personal Experience!]
- How Long Do Snowboard Boots Last & Tips Last Longer! 
- How To Fall Snowboarding To Avoid Injuries [2023 Update]
- How To Stretch Snowboard Boots [Tips From Personal Experience!
FAQs On How To Get Glue Off A Snowboard
How Do You Remove Glue Residue?
Wondering how you remove glue residue? To remove glue residue, vegetable or canola oil can work wonders, as can peanut butter or mayonnaise. Spread it on, let it soak into the residue for about an hour, then wipe it away. Alcohol or vodka is great for removing tougher and stubborn residue.
How Do You Get Sticker Residue Off a Snowboard?
You can get sticker residue off a snowboard by using cotton or a cloth to rub some olive oil on the sticker. Wait a few minutes and scrape off the sticker using a plastic scraper. Excess oil can be removed using some Windex and wiping it with a cloth or paper towel.
The most important part of snowboarding is, of course, the snowboard itself. Stickers are great ways to show off your snowboard, but I understand how annoying it is to find glue residue on the board.
Finding the right snowboard that fits, proper care, and maintenance is important to ensure that your snowboard last. These can help save costs instead of replacing one every other year.
I hope the above guide helps you remove those pesky glues on your snowboard and help keep your snowboard in a good condition throughout the season.
And if you know anyone who needs help in how to get glue off a snowboard, remember to share this with them!